DSC PTK5507 Manuel d'utilisateur télécharger pdf

Using the LCD5511 Keypad

WARNING: Please refer to the System Instruction Manual for information on limita-

tions regarding product use and function and information on the limitations as to lia-

bility of the manufacturer.

The LCD5511

shows the status

of your security

system using an

LCD display,

along with fixed

symbols and

numbers.

This instruction

sheet describes

the basic fea-

tures of the key-

pad. For more

detailed informa-

tion on your se-

curity system

and how to use it, please read your system’s In-

struction Manual. Test system weekly and have

any system trouble conditions corrected by

your alarm installer.

1. Display

2. System Lights

Ready Light (Green)

If the Ready light is ON, the system is ready for

arming. The system cannot be armed unless

the Ready light is ON.

Armed Light (Red)

If the Armed light is ON, the system has been

armed successfully.

3. Number Pad

Use the number pad to enter your code, and to

access system functions. To exit a function and

return to the Ready state, press . To select

a function press .

4. Emergency Keys

NOTE: *(All Keypads) The Fire, Auxiliary and

Panic keys will NOT function unless programmed

by the installer. If these keys are in service and the

installer has enabled audible feedback, holding

down the key for two seconds will cause the keypad

sounder to beep indicating that the input has been

accepted and sent.

5. Function Buttons ( )

If your installer has enabled them, you can use

the function buttons to access the Stay arm,

Away arm, Door Chime features (your installer

may program other functions for these but-

tons). Press and hold the appropriate button

for two seconds. Refer to your Installation Man-

ual for more information on these features.

Using the LCD5511 Keypad

The LCD5511 works similarly to the other key-

pads described in your system’s Instruction

Manual. For more information on individual func-

tions, see your system’s Instruction Manual.

Viewing Open Zones

Before you can arm your system, all the zones

must be closed. If some zones are currently

open, the keypad will display , and the

Ready light will be off. To see the numbers of

the open zones, press . Before you try to arm

your system, go to the open zones and close all

doors and windows, and make sure no one is

present in zones with motion detectors.

Viewing Zones in Alarm Memory

If there is an alarm on your system the keypad

will display and will scroll the numbers of

the zones affected. To view zones in memory,

press .

AC is present Zone(s) open

Zone(s)

bypassed

System Trouble

Trouble display

Door Chime

System armed

in Away mode

System armed

in Stay mode

Alarm(s) in memory

Fire alarm(s) in memory

System armed

Night mode

Programming

in progress

Press and hold both keys simultaneously for

2 seconds to send the following messages:

Fire Message

Auxiliary Message

Panic Message

1. Display

2. System

Lights

3. Number

Pad

1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - Using the LCD5511 Keypad

Using the LCD5511 KeypadWARNING: Please refer to the System Instruction Manual for information on limita-tions regarding product use and function and

Page 2 - To do this: Press this:

Garantía LimitadaDigital Security Controls Ltd. garantiza al comprador originalque por un periodo de doce meses desde la fecha de compra,el producto e

Page 3 - Voyant Armé (Vert)

Limited WarrantyDigital Security Controls Ltd. warrants the original pur-chaser that for a period of twelve months from the date ofpurchase, the produ

Page 4 - Affichage des zones en alarme

Page 5

System Functions - Quick ReferenceThe following chart lists the basic functions of your system and the keys to press for each function. NOTE: Some fun

Page 6 - Usando el Teclado LCD5511

Utilisation du clavier LCD5511AVERTISSEMENT: Pour connaitre les restrictions d’utilisation et de fonctionne-ment de ce produit ainsi que les limitatio

Page 7

Utilisation du clavier LCD5511Le clavier LCD5511 fonctionne de façon sim-ilaire aux autres claviers qui sont décrits dansle manuel d’instructions de v

Page 8 - [código maestro]

Régler l’heure et la date du système : [Code maître] , entrez l’heure actuelle (format 24 h : 00:00 à-23:59) et la date (mois/jour/année), c.-à-d. 1

Page 9 - Garantie Limitée

Usando el Teclado LCD5511ADVERTENCIA: Por favor refiérase al Manual de Instrucciones del Sistema para in-formarse acerca de las limitaciones relaciona

Page 10 - Garantía Limitada

Visualización de Zonas abiertasAntes de que Ud. pueda armar su sistema, to-das las zonas deben estar cerradas. Si algu-nas zonas estuvieran actualment

Page 11 - Limited Warranty

Programar hora y fecha del sistema: [Código Maestro] , ingresar hora actual (formato 24 hs. : 00:00-23:59) y fecha (mes/día/año) con 10 dígitos: [hh

Page 12 - FCC COMPLIANCE STATEMENT

Garantie LimitéeLa société Digital Security Controls Ltée. garantit le produitcontre toutes défectuosités matérielles et d’assemblage dansdes conditio