DSC ESCORT558O Manuel d'instructions Page 17
- Page / 20
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
15
Access Code Programming
The Access Code Programming function allows you to program access codes that will function on
the security system as well as on the Escort. The system can be set to accept 4 or 6 digit user
codes. Depending on what model of security system you have, you may have the ability to program
either 6 or 32 access codes. To program these user codes, follow these steps:
With the system disarmed, access the security system using the steps described in the
Accessing Your Security System and Accessing Partitions section of this manual.
Press the [
] key. When the system announces
“For Automation Control and User Programming press [5]”“For Automation Control and User Programming press [5]”
“For Automation Control and User Programming press [5]”“For Automation Control and User Programming press [5]”
“For Automation Control and User Programming press [5]”
press the [5] key. The system will then announce
“For Automation Control press [1], f“For Automation Control press [1], f
“For Automation Control press [1], f“For Automation Control press [1], f
“For Automation Control press [1], f
or User Programming press [2], to exit pressor User Programming press [2], to exit press
or User Programming press [2], to exit pressor User Programming press [2], to exit press
or User Programming press [2], to exit press
[#]”[#]”
[#]”[#]”
[#]”
Press the [2] key. Enter your master access code. The system will then announce:
“User Code Programming, enter the (one/tw“User Code Programming, enter the (one/tw
“User Code Programming, enter the (one/tw“User Code Programming, enter the (one/tw
“User Code Programming, enter the (one/tw
o) digit user number. For User Optiono) digit user number. For User Option
o) digit user number. For User Optiono) digit user number. For User Option
o) digit user number. For User Option
programming press [9]. User X, X and X are programmed to exit press [#].”programming press [9]. User X, X and X are programmed to exit press [#].”
programming press [9]. User X, X and X are programmed to exit press [#].”programming press [9]. User X, X and X are programmed to exit press [#].”
programming press [9]. User X, X and X are programmed to exit press [#].”
NOTE: Your system may or may not prompt you with the “User Option Programming”
prompt. Please consult your security system users manual for more information on
user options.
Enter the number of the access code that you wish to program at this time. The system will
announce:
“Enter the ne“Enter the ne
“Enter the ne“Enter the ne
“Enter the ne
w (4/6) digit access code. Tw (4/6) digit access code. T
w (4/6) digit access code. Tw (4/6) digit access code. T
w (4/6) digit access code. T
o exit press [#]”o exit press [#]”
o exit press [#]”o exit press [#]”
o exit press [#]”
Enter the new code at this point. You will again be prompted by the message:
“User Code Programming. Enter the (one/tw“User Code Programming. Enter the (one/tw
“User Code Programming. Enter the (one/tw“User Code Programming. Enter the (one/tw
“User Code Programming. Enter the (one/tw
o) digit user number. For User Optiono) digit user number. For User Option
o) digit user number. For User Optiono) digit user number. For User Option
o) digit user number. For User Option
programming, press [9]. Users X, X and X are programmed to exit. Press [#]”programming, press [9]. Users X, X and X are programmed to exit. Press [#]”
programming, press [9]. Users X, X and X are programmed to exit. Press [#]”programming, press [9]. Users X, X and X are programmed to exit. Press [#]”
programming, press [9]. Users X, X and X are programmed to exit. Press [#]”
NOTE: Your system may or may not prompt you with the “User Option Programming”
prompt. Please consult your Security System Instruction Manual for more information
on user options.
If you wish to program another access code, enter the user number. If not, press [#] to return
to the main menu.
- Instruction 1
- Introduction 3
- Local Access 4
- Remote Access 4
- Accessing Partitions 4
- Accessing Multiple Partitions 5
- Arming The System 6
- Disarming The System 7
- Alarm Memory 8
- Bypassing Zones 9
- Trouble Conditions 10
- Utility Output Feature 11
- Sensor Reset Feature 11
- Door Chime Feature 12
- Setting The Time and Date 13
- Volume and Speech Rate 14
- Home Automation 15
- Mode Control Menu Function 16
- Access Code Programming 17
- Fire Safety in the Home 18
- Limited Warranty 19
- FCC COMPLIANCE STATEMENT 19
- IMPORTANT INFORMATION 19
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC ESCORT558O
(18 pages)
(44 pages)
(10 pages)
(32 pages)
(32 pages)
(55 pages)
(25 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.019 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels