DSC LCD5501Z Manuel d'installation télécharger pdf (Page 3)

1

Introduction

The LCD5501Z keypad presents system

status using an LCD display along with

fixed words/icons and numbers. The key-

pad can be used on security systems

with up to 64 zones. The LCD5501Z is

compatible with the following DSC secu-

rity systems:

• PC580/PC585 • PC5008

• PC1555/PC1565 • PC50XX

• PC1555MX

Specifications

• Connects to control panel via 4-wire

Keybus

• One keypad zone input/PGM output

• Current draw: 35mA (standby) /

125mA (maximum)

• Voltage rating: 12V

DC nominal

• Optional tamper version

• Five programmable function keys

• Ready (green), Armed (red) and Trou-

ble (yellow) status lights

Installation

Unpacking

The LCD5501Z package includes the fol-

lowing parts:

• One LCD5501Z keypad

• Four mounting screws

• One keypad inner door label

• One set of Fire, Auxiliary and Panic

key labels

Mounting

You should mount the keypad where it is

accessible to designated points of entry

and exit. Once you have selected a dry

and secure location, perform the follow-

ing steps to mount the keypad.

1. Remove the keypad backplate by

loosening the screw located at the

base of the unit.

2. Secure the keypad backplate to the

wall in the desired location. Use the

screws provided.

3. Before attaching the keypad to its

backplate, complete the keypad wir-

ing as described in the next section.

Wiring

1. Before beginning to wire the unit, en-

sure that all power (AC transformer

and battery) is disconnected from the

control panel.

2. Connect the four Keybus wires from

the control panel (red, black, yellow

and green) to the keypad terminals (R

B Y G). Consult the diagram below:

3. If programmed as an input, you can

connect a device - such as a door

contact - to the ‘Z/P’ terminal of the

LCD5501Z. This eliminates the need to

run wires back to the control panel for

the device. To connect the zone, run

one wire from the device to the ‘Z/P’

terminal and the other wire from the

device to the B (black) terminal. For

F2

F4

F3

F5

F1

AM

✔

TEST SYSTEM WEEKLY

Refer to Instruction Manual for

testing instructions.

X

NOT IN USE NOT IN USE

X

X

NOT IN USE

F1

F2

F3

F4

F5

Red

Blk

Ye l

Grn

To Zone Input /

PGM Output

RBYG

Z/ P

1 2 3 4 5 6 7 8 ... 11 12

Commentaires sur ces manuels

Pas de commentaire