DSC PC1500 - REV8 Manuel d'instructions Page 1

INSTRUCTIONMANUALPRINTED IN CANADA 29000179 R1©1993,2000 DIGITAL SECURITY CONTROLS LTD.Toronto, Canada • www.dsc.comwww.dsc.comwww.dsc.comwww.dsc.co

ALARM TESTEnter [∗][6][Master Code][8] for a 2-second test of the keypad lights, keypadbuzzer, battery and the bell/siren.Press [#] to return to Ready

ENTRY DELAY OFF ARMINGIf you wish to arm your system and eliminate the entry delay, enter [∗][9]before your access code. The “Armed” light will flash

MASTER CODEThe 4 digit Master Code is used to arm and disarm the security system, toprogram additional security codes and to change other system featu

8. When testing is complete, call and advise the monitoring station.MAINTENANCEWith normal use, the system requires minimum maintenance. The following

1• If the exit is above the ground level, an approved fire ladder or ropeshould be provided as well as training in its use.• Exits on the ground level

Department of Communications NoticeNOTICE: The Canadian Department of Communications label identifies certified equipment. This certificationmeans

INSTRUCTIONMANUALPRINTED IN CANADA 29000179 R1©1993,2000 DIGITAL SECURITY CONTROLS LTD.Toronto, Canada • www.dsc.comwww.dsc.comwww.dsc.comwww.dsc.co

Department of Communications NoticeNOTICE: The Canadian Department of Communications label identifies certified equipment. This certificationmeans

1• If the exit is above the ground level, an approved fire ladder or ropeshould be provided as well as training in its use.• Exits on the ground level

8. When testing is complete, call and advise the monitoring station.MAINTENANCEWith normal use, the system requires minimum maintenance. The following

MASTER CODEThe 4 digit Master Code is used to arm and disarm the security system, toprogram additional security codes and to change other system featu

ENTRY DELAY OFF ARMINGIf you wish to arm your system and eliminate the entry delay, enter [∗][9]before your access code. The “Armed” light will flash

ALARM TESTEnter [∗][6][Master Code][8] for a 2-second test of the keypad lights, keypadbuzzer, battery and the bell/siren.Press [#] to return to Ready

Ready light ON - System is ready for arming.Ready light OFF - System has an open zonewhich must be closed or bypassed beforearming.Memory light ON mea

Ready light ON - System is ready for arming.Ready light OFF - System has an open zonewhich must be closed or bypassed beforearming.Memory light ON mea