DSC PC5020 Manuel d'installation télécharger pdf (Page 15)

3.5 Viewing Programming

LED and LCD5501Z Keypads

Any programming section can be viewed from an LED or

LCD5501Z keypad. When a programming section is entered, the

keypad will immediately display the first digit of information pro-

grammed in that section.

The keypad displays the information using a binary format,

according to the following chart:

See Hex data

entry instructions

Press any of the Emergency Keys (Fire, Auxiliary or Panic) to

advance to the next digit.

When all the digits in a section have been viewed, the panel will

exit the section: the Ready Light will turn OFF, and the Armed

light will turn ON, waiting for the next three-digit programming

section number to be entered.

Press the [#] key to exit the section

LCD Keypad

When a programming section is entered, the keypad will imme-

diately display all the information programmed in that section.

Use the arrow keys (< >) to scroll through the data being dis-

played. To exit the section, scroll past the end of the data dis-

played, or press the [#] key.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Pas de commentaire

DSC PC5020 Manuel d'installation Page 15