DSC PC5020 Manuel d'installation télécharger pdf (Page 37)

[997] View Software Version

[998] Initiate Global Label Broadcast

All LCD programming is done per keypad. If more than one LCD keypad are present on the system, and the PC5400 receives

labels, labels programmed at one keypad can be broadcast to all other LCD keypads. Perform the following procedure in order to

broadcast labels:

Step 1 - Program one LCD keypad completely.

Step 2 - Make sure all LCD keypads are connected to the Keybus.

Step 3 - Enter Installer’s Programming, then enter section [998] at the keypad that was programmed. The keypad will now broad-

cast all the information programmed to all the other LCD keypads on the system.

Step 4 - When the keypad is finished press the [#] key to exit.

[999] Reset LCD EEPROM to Factory Defaults

ASCII Characters

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

DSC PC5020 Manuel d'installation Page 37