DSC PC6010 Manuel d'installation télécharger pdf (Page 5)

SYSTEM RESETSYSTEM RESET

SYSTEM RESET

(2)(2)

(2)

SYSTEM SECTION SYSTEM SECTION

SYSTEM SECTION

INSTALLER OPTSINSTALLER OPTS

INSTALLER OPTS

This section contains the Installer’s Code, Walk Test Code and System Reset options.

Installer’s Code. You can program a new Installer’s Code. The default setting is ‘5555’ for the 4-digit

option, or ‘555555’ for the 6-digit option. Enter a new code, using numbers from 0 to 9 only. Use the

installer’s code to enter the [*][8] Installer’s Programming menu. Change this code from the default

setting before programming is complete, to ensure the security of the system.

The Walk Test code gives a user access to the Walk Test Mode. When a user enters the Walk Test code at

a system keypad, they will have access to the following menu options.

Local Walk Test, Local + Com Test, Silent Com Test, Disable Walk Test, Seismic Test

Perform a “System Reset” if a “Module Comm Fault” occurs. This turns off power to the Combus for 5

seconds. No programming will be lost and the time does not have to be reprogrammed.

The system uses the Private key, together with a randomly generated Public key, to encrypt

communications over the Combus, making them more secure.

Enter an 8-digit code for the private key. See also “Public Key Cycle” under System Times.

INSTALLER CODEINSTALLER CODE

INSTALLER CODE

(0)(0)

(0)

INSTALLER OPTSINSTALLER OPTS

INSTALLER OPTS

(00)(00)

(00)

Installer Options

WALK TEST CODEWALK TEST CODE

WALK TEST CODE

(1)(1)

(1)

PRIVATE KEYPRIVATE KEY

PRIVATE KEY

(3)(3)

(3)

1 2 3 4 5 6 7 8 9 10 ... 51 52

Pas de commentaire

DSC PC6010 Manuel d'installation Page 5