DSC PC6010 Guide de l'utilisateur télécharger pdf (Page 9)

Using Access Cards

NOTE: This section only applies to systems that have card readers and the PC6820 access

control module installed. Talk to your installer for information regarding the access control

capabilities of your system.

If your system has access control capabilities, instruct your users on the use of their access

cards. All four types of users may use access cards.

Using Your Access Card

To gain access to an area via a door with an access card reader, present your access card

to the reader. Depending on the type of reader, this may mean "swiping" your card

through the reader, or just holding your card in front of the reader. The system will either

grant or deny you access to the protected area, depending on how your card has been

programmed.

Most access card readers will have a status light. This light will indicate your access status

once the card is presented. The light will appear according to the following conditions:

• Steady red light: The door is locked.

• Steady green light: The door is unlocked.

• Slowly flashing from red to green: The area is turned on.

• Flashing from red to green twice per second: The reader is waiting for a second card

to be swiped.

• Flashing from red to green three times per second: Access is denied.

Some access card readers also have audible indicators which beep under certain conditions.

The reader may beep when an access control door has been left open too long, or when

a door has been forced open.

Turning Areas On and Off Using an Access Card

You may be able to automatically turn your areas on and off using your access card. Ask

your installer if this feature has been enabled.

To turn an area on using an access card, ensure that the area is secured. Close all protected

doors and cease movement in areas covered by motion detectors. Swipe the access card

in the reader. Push the “Arm” button. The exit delay will begin.

To turn an area off, present the access card to the reader. The area may turn off, if the

system allows. If disarming is granted, the door will unlock. When you open the door, the

system will turn the area off.

To program access cards for your users, please see section 6.

S E C T I O N 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

DSC PC6010 Guide de l'utilisateur Page 9