DSC Power832 PC5O15 Manuel d'instructions

®®InstructionManualPC5O15v2.7U and higherWARNING This manual contains information on limitations regarding product use and function andinformation on

9LCD5500(Z) Keypad:The Liquid Crystal Display (LCD) displays prompts andsystem information on two 16 character lines.If “< >” appears, more info

10Programming codes from an LCD Keypad:Master CodePress the [Q] key to enter the function list. Scroll (< >) to...Press [5] or [Q]. The display

11Zone BypassingThe zone bypassing function is used when access is needed to part of the protected area while thesystem is armed. Zones which are temp

12Viewing Trouble ConditionsThe control panel continuously monitors a number of possible trouble conditions. If one of these troubleconditions occur,

13Setting the System Date and TimeTo set the system time, enter [Q] [6] followed by the Master Code. Press [1]. The keypad will nowaccept 10 consecuti

14Door Chime FeatureThe door chime feature is used, while the panel is disarmed, to provide a tone from the keypad eachtime a door or window is opened

15Fire Alarm OperationAlarmOn a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the centralstation is delayed fo

16Fire Escape PlanningThere is often very little time between the detection of a fire and the time it becomes deadly. It is thusvery important that a

FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use th

1About Your Security SystemYour DSC Power832 Security System has been designed to provide you with the greatest possibleflexibility and convenience. R

2System InformationFill out the following information for future reference and store this manual in a safe place.Access CodesYour Master Code is: ____

315 ___________________________________________ _____________________________________16 ___________________________________________ __________________

4Access CodesAccess codes are used to arm and disarm the system. There are 37 access codes available: 1 mastercode, 32 regular access codes, 2 duress

5Arming Using Push to Set or Final Door Set ZonesIf a Push to Set or Final Door Set Zone is used, an infinite exit delay will be initiated when the sy

6Quick ExitWhen the Quick Exit feature is enabled, pressing [✱][0] while the system is armed will provide a twominute window for you to exit the premi

7NOTE: If you return and find that an alarm has occurred while you were away, it is possible that an intrudermay still be on the premises. Go to a nei

8PC5508(Z), PC5516(Z) and PC5532(Z) Keypads:Press the keys on the number pad to view alarms ortroubles, to Arm/Disarm the system or to bypass zones.To