DSC PC255O Spécifications télécharger pdf (Page 13)

PRINTER SETUP

Note: Printer option has not been verified by UL.

The PC2550 with version 1.0 or higher software is

capable of sending data to a local printer.

The printer must be capable of serial communication (RS-

232).

The PC2550 should work with most serial printers,

however the printers on the following list are strongly

recommended.

Compatible printers:

1. Brother M-1109

2. Brother M-1809

3. Star DP 40

4. Epson EP 40

5. C - Itoh model 8510 B

6. Citizen 120-D with serial card

7. Citizen 180-D with serial card

8. Rolland DG PR 1112 with serial card

9. Panasonic KX P1091 I with serial card

10. Mannesman Tally MT81 with serial card

11. Raven 9101 with serial card

Configuring the Printer

1.Serial interface

2.Baud rate = 1200 (other baud rates may be used but

section [48] must be changed accordingly)

3.Parity = None

4.Character length = 8 bits

5.Auto linefeed = Off

6.American/Canadian character set

To hook up the printer, start by fully powering down the

panel

and the printer. Using A DB-25 connector, connect the

printer

to the panel as shown below. The maximum cable length

should be 6 feet.

Note: If SRTS is not available turn on light 6 in section

[48] and attach yellow to 4 (RTS) or to 20 (DTR).

Programming the Panel for Use with a

Printer

Section [48] in the panel must be programmed to enable

the printer function. See section [48]. Power up the panel

and program it as described below.

Enter the Installer’s Programming section and edit the

following sections. ([✱]+[8]+[Installer’s Code])

Section Printer Only Monitored and

Printer

[01] Do not program Program normally

[02] Program normally Program normally

[03] Do not program Program (see section

[48] zone light 5)

[04] Do not program Program normally

[05] to [13], [50] Program everything

Program everything

you wish printed you wish printed

[14], [15] Program normally Program normally

[16] Light 4 must be offLight 4 must be off

[17] to [29] Program normally Program normally

[30] Program with “0C” Program with “0C”

[31] to [34] Program normally Program normally

[35] Program all 1's Program normally

[46], [47] Program normally Program normally

[48] Printer setup Printer setup

[49] to [53] Program normally Program normally

Note: the time of day, day, month and year must be

programmed into the panel using the [

✱

]+[6]+[Master

Code]+[1] command as described on page 10.

Plug in the printer, insert paper and turn it on line. Your

serial printer is now ready to use.

The following is a sample of a printout from the serial

printer:

07:33 04\01\91 STAT 2 ACCN 5678

CLS ACC 1

12:57 04\01\91 STAT 1 ACCN 1234

ALR ZN 2

ALR ZN 12

13:01 04\01\91 STAT 1 ACCN 1234

RES ZN 2

RES ZN 12

18:01 04\01\91 STAT 2 ACCN 5678

OPN AFTALR

OPN ACC 1

Note:

Station 0 is for a local only printer.

Station 1 is telephone number 1.

Station 2 is telephone number 2.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

DSC PC255O Spécifications Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC PC255O