DSC Power8 PC5005 Guide de l'utilisateur télécharger pdf (Page 6)

➊ Displays (LCD Keypads):

Fixed Message Display (LCD5501Z Keypad)

Shows the status of your security system using an LCD

showing fixed words and numbers. The display is

described below.

Liquid Crystal Display (LCD5500Z Keypad)

The LCD shows prompts and system information on

two 16-character lines.

Press the keys on the number pad as

prompted by the LCD to view alarms or troubles, to

arm and disarm the system and to bypass zones.

➋ Status Lights (All Keypads):

Ready Light

If the Ready light is ON, the system is ready for arm-

ing. The system cannot be armed unless the Ready

light is ON (see “Getting Ready to Arm Your System”

on page 6).

Armed Light

If the Armed light is ON, the system has been armed

successfully.

Trouble Light

A flashing Trouble Light indicates AC Trouble. If the

Trouble light is ON, see “Identifying Trouble Condi-

tions” on page 17.

➌ Number Pad (All Keypads):

To select a function press . To exit a function and

return to the Ready state, press .

➍ Function Buttons (All Keypads):

If your installer has enabled them, you can use the

function buttons to access the Stay arm, Away arm,

door chime, sensor reset and quick exit features by

pressing and holding a button for two seconds. Refer

to the manual for more information on these features.

➎ Arrow Keys (LCD5500Z Keypad Only):

If “< >” appears, more information can be accessed

by using the keys. Press to see the pre-

vious function or item of information. Press to

advance the display to the next function or item of

information.

➏ Emergency Keys (All Keypads):

Press both * keys for two seconds to send a Fire

message. Press both * Keys for two seconds to

send an Auxiliary message. Press both * Keys for

two seconds to send a Panic message.

IMPORTANT: *(All Keypads) The Fire, Auxiliary

and Panic keys will NOT function unless pro-

grammed by the installer. If these keys are in ser-

vice and the installer has enabled audible

feedback, holding down the key for two seconds

will cause the keypad sounder to beep indicating

that the input has been accepted and sent.

➐ Zone Lights (PC55XXZ Keypads):

The system uses the zone lights to indicate zone

alarms, troubles, alarms in memory, and to aid pro-

gramming.

➑ Function Indicators (LCD5501Z and

PC55XXZ Keypads):

Memory

Upon disarming, if an alarm has occurred while the

system was armed, the Memory indicator will turn on

(See “Viewing Alarms in Memory” on page 13).

Bypass

If the Bypass indicator is ON, one or more zones are

bypassed (See “Bypassing Zones” on page 15).

Fire

If the Fire indicator is on, a fire alarm has occurred

(See “Fire Alarms” on page 12).

Program

The Program indicator will flash when you are pro-

gramming access codes, or performing other pro-

gramming functions. If someone is programming at

another keypad, the Program indicator will turn ON to

indicate that the system is busy.

IMPORTANT: Test system weekly and have any

system trouble conditions corrected by your

alarm installer.

Index

Access codes

adding 20

changing 20

defined 23

erasing 20

Master code 24

programming 20

Alarm

defined 23

false 12

fire 12

intrusion 13

memory 13

viewing 13

Arming

automatic 10

away 7

getting ready 6

no entry delay 9

quick 9

stay 8

Automatic arming 10

Auxiliary keys 14

Away

arming 7

Bells

testing 18

Buttons on keypad 1

Bypass group 16

Bypassing zones 15

Central station 5

defined 23

Cleaning the system 5

Codes See Access codes

Computer access to system

Date

clearing display 21

setting 21

Detectors

defined 23

Disarming 11

Display

brightness 21

contrast 21

description 1

Door

chime 19

entry/exit 7, 23

Downloading 19

Emergency keys 14

Entry delay 11

defined 23

Entry/exit door

defined 23

Events

viewing 18

Exit

quick 11

Exit delay 7

defined 24

False alarm 12

Fire

alarm 12

detection 5

escape planning 22

keys 14

safety 22

Function buttons 1, 7, 9

Keypad

brightness 21

contrast 21

descriptions 1

language 21

sounder 21

Language 21

Lights on keypad 1

Maintenance of system 5

Master code 24

Monitoring station 5

Panic keys 14

Partition

defined 24

Problem, See Trouble

Programming

automatic arming 10

codes 20

time and date 21

Quick

arming 9

exit 11

Ready light 6

Ready state 6

Remote monitoring 5

Secure system 6

Siren

testing 18

Stay

arming 8

System

arming 7

disarming 11

how it works 4

maintenance 5

securing 6

testing 5, 18

trouble 17

Testing 5

entire system 18

keypad sounder 18

siren 18

Time

clearing display 21

setting 21

Trouble

defined 24

messages 17

Turning off system

See Disarming

Turning on system

See Arming

Viewing

alarms 13

events 18

troubles 17

Zones

bypassing 15

defined 24

testing 18

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

DSC Power8 PC5005 Guide de l'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC Power8 PC5005