DSC WTK5504 Manuel d'installation télécharger pdf (Page 5)

Changing Brightness

1.Press More > User Options > Keypad Config >

Brightness.

2.Use the slide bar to adjust brightness to the

desired setting.

3.To exit press the Back or Home button.

Changing the Volume

1.Press More > User Options > Keypad Config >

Volume Settings.

2.Use the slide bar to adjust volume to the desired

setting.

3.To exit press the Back or Home button.

Installer Keypad Configuration

There are several configuration options available

for the keypad (see below). Keypad configuration

options are set by using the touchscreen to navi-

gate menu screens. For information on program-

ming the rest of your security system, please refer

to your system’s Installation Manual.

Keypad Options

Press More > Installer Options [Installer Code] >

Keypad Options to open a list of programmable

options for the keypad. Use the arrow keys on the

right side of the screen to scroll through the list of

options. Press the switch underneath each option

to toggle the state of the option.

• Fire Key Enable or Disable (Default = Enabled)

• Auxiliary Key Enable or Disable

(Default = Enabled)

• Panic Key Enable or Disable

(Default = Enabled)

• Clock Screen Saver Enable or Disable

(Default = Enabled, 1 minute timeout)

• Clock Display 24 hrs or AM/PM

(Default = AM/PM)

• Power LED Enable or Disable

(Default = Disabled)

• Power LED Indicates AC is Present or Absent

(Default = Present)

• Local RF Jam Enable or Disable

• (Default = Enabled)

• Instant Stay Enable or Disable (Default = Disable)

Displaying Keypad Software Versions

1.Press More > Installer Options [Installer Code]

>Versions.

2.Examine the version information displayed on

the screen.

3.To exit press the Back or Home button.

Zone Label Programming

The WTK5504 is programmed with default labels

to identify each zone (e.g., the label for zone 5 is

‘Zone 05’). Use this section to assign a meaning-

ful name to each zone (e.g., ‘Living Room

Motion Sensor’). The WTK5504 features a data-

base of words commonly used when describing

zones that can be combined to create a label.

1.Enter Label Programming by pressing More >

Installer Options [Installer Code] > Labels Pro-

gramming > Zone Labels.

2.Use the up and down arrows to navigate to the

desired zone and press the current zone label.

3.Use the alphabet at the top of the screen to

select the first letter of the desired label.

4.Use the up and down arrows to scroll through

the list of words starting with the selected letter

and press the word to add it to the zone label.

5.Repeat steps 3 and 4 to add additional words to

the label as needed until or the character limit

(28) is reached.

6.Press Save to save the label and return to the

Labels Programming screen.

Label Library

The Label Library is a database of words com-

monly used when programming labels. Individual

words can be combined as needed. e.g., Front +

Door. Each line of the display supports a maxi-

mum of 14 characters.

Enable Verbal Chime by Zone

The WTK5504 allows the installer to select which

zones announce verbal chime. By default, verbal

chime is disabled for all zones. To enable verbal

chime, press More > Installer Options [Installer

Code] > Verbal Chime Zones. Use the arrows at

the right side of the screen to scroll through a list

of zones and press the switch button beside the

zone label to enable/disable verbal chime for that

zone.

Broadcasting Labels

Label programming is done using Keypad 1 or, if

using the SCW9055/SCW9057, from the main

control panel. Labels are broadcast to all other

WTK5504 keypads enrolled on the system.

Perform the following in order to broadcast

labels:

1.Program Keypad 1 or the SCW9055/9057 con-

trol panel completely.

2.Press More > Installer Options [Installer Code]

> Labels Programming > Broadcast Labels at

the keypad that was programmed.

NOTE: This operation may take several min-

utes.

3.To exit press the Back or Home button.

NOTE: Label broadcast from Keypad 1 is

only compatible with other WTK5504 key-

pads (PC9155 and Power v4.6+ only).

End User Instructions

After completing the installation of the

WTK5504, it is the installer’s responsibility to

inform the end user of the following:

• Clean the touchscreen with a soft cloth and iso-

propyl alcohol. Use of other cleaners such as

water, ketone (e.g., acetone), and/or aromatic

solvents (e.g., benzene and toluene) may dam-

age the display.

• Do not attempt to disassemble the LCD Module.

• Do not subject the touchscreen to mechanical

shock (e.g., dropping or striking). Mechanical

shock could damage the glass display.

• If the touchscreen is damaged, the liquid crystal

fluid inside could leak out. Avoid contact with

the liquid crystal fluid. If the liquid crystal fluid

comes into contact with your skin or clothes,

promptly wash it off using soap and running

water. Seek medical care.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

DSC WTK5504 Manuel d'installation Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC WTK5504