DSC WTK5504 Manuel d'installation télécharger pdf (Page 4)

onds. The Ready and AC LEDs will return to

their previous state.

5.Repeat steps 3 & 4 on each additional keypad

to be enrolled.

Quick Enrolling

On Alexor and Impassa alarm panels, quick

enrolling reactivates the enrollment period.

1.Enter installer’s programming.

2.Enter programming section [898].

3.Press the ‘Enroll’ button to start the enrollment

process.

Manual Enrolling

Use manual enrolling to directly enter the

serial number of the keypad. For Alexor and

Impassa alarm panels:

1.Enter installer’s programming.

2.Enter programming section [804].

3.Enter subsections [201] to [204] for keypad

slots 1 to 4 and enter the full 8-digit keypad

serial number.

For PowerSeries alarm panels using a TR5164:

4.Enter installer’s programming.

5.Enter programming section [804].

6.Enter subsections [29] to [32] for keypad slots

1 to 4 and enter the last 6 digits of the keypad

serial number.

Keypad LED Symbols

Proximity Tags (WTK5504P

with Alexor PC9155/57 or

Impassa only)

Proximity tags can perform any keypad func-

tion that would normally require a user access

code. Simply present the tag to the target icon

to the left of the keypad screen.

Enrolling Proximity Tags

Enrolling a tag on one keypad will enroll it

automatically on all WTK5504P and

WT5500P keypads.

1.Press More > User Options > Access Code

Prog. [Master Code].

2.Use left and right arrow buttons to select the

user number to be associated with the proxim-

ity tag and press Select.

3.If the user access code is already assigned, skip

to step 6.

4.Press Set Access Code.

5.Enter the desired four or six digit access code.

6.Press Prox Tag Prog.

7.Present the proximity tag to the keypad. If

enrollment is successful, acknowledgement

beeps will sound and the keypad screen will

read ‘Tag Enrolled Successfully’. If the prox-

imity tag has been enrolled previously, an error

tone will sound. The screen will read ‘Dupli-

cate Tag/User Code’.

8.The keypad will return to the

User Settings

menu.

Deleting Proximity Tags

Delete tags from the system when they are lost

or no longer needed. To delete a proximity tag,

the user code it is associated with must be

deleted.

1.Press More > User Options > Access Code

Prog. [Master Code].

2.Use left and right arrow buttons to select the

user number associated with the proximity tag

to delete and press Select.

3.Press Delete User and confirm by pressing Yes.

NOTE: User codes can only be deleted indi-

vidually.

NOTE: User 40 - Master Code cannot be

deleted; a deletion attempt on this user code

will delete the proximity tag only.

NOTE: Once a proximity tag is deleted, it

must be re-enrolled before it can be used

again.

User Keypad Configuration

There are several configuration options avail-

able for the keypad (see below). Keypad con-

figuration options are set by using the

touchscreen to navigate menu screens. For

information on programming the rest of your

security system, please refer to your system’s

Installation Manual.

Changing Language

1.Press More > User Options > Keypad Config

> Languages.

2.Select the desired language.

3.To exit press the Back or Home button.

Changing Verbal Options

1.Press More > User Options > Keypad Config

> Verbal Options.

2.When Verbal Prompt is set to ON, the

WTK5504 will speak system prompts (e.g.,

‘Quick Exit in progress’).

3.To exit press the Back or Home button.

4.Press the lower left button on the home screen

to cycle the keypad chime between “Voice

Chime”, “No Chime” and “Chime”.

NOTE: Verbal chimes will only announce on

zones that have verbal chime enabled. See

“Enable Verbal Chime by Zone” in the

“Installer Keypad Configuration” section

below for instructions.

Symbol Description

Ready

(Green) ON - the system is ready to arm.

Armed

(Red)

ON / Flashing - the system has

been armed successfully.

Trouble

(Yellow)

ON - a system trouble is present.

Flashing - Wireless interference

detected.

(Green)

ON - AC is present at the

keypad.

Proximity Tag

Reader

1 2 3 4 5 6 7 8 9 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

DSC WTK5504 Manuel d'installation Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC WTK5504