DSC WTK5504 Manuel d'installation télécharger pdf (Page 8)

Limited Warranty

Digital Security Controls (DSC) warrants that for a period of 12 months from the date of

purchase, the product shall be free of defects in materials and workmanship under nor-

mal use and that in fulfilment of any breach of such warranty, DSC shall, at its option,

repair or replace the defective equipment upon return of the equipment to its repair

depot. This warranty applies only to defects in parts and workmanship and not to dam-

age incurred in shipping or handling, or damage due to causes beyond the control of

DSC such as lightning, excessive voltage, mechanical shock, water damage, or damage

arising out of abuse, alteration or improper application of the equipment. The foregoing

warranty shall apply only to the original buyer, and is and shall be in lieu of any and all

other warranties, whether expressed or implied and of all other obligations or liabilities

on the part of DSC. DSC neither assumes responsibility for, nor authorizes any other per-

son purporting to act on its behalf to modify or to change this warranty, nor to assume

for it any other warranty or liability concerning this product. In no event shall DSC be lia-

ble for any direct, indirect or consequential damages, loss of anticipated profits, loss of

time or any other losses incurred by the buyer in connection with the purchase, installa-

tion or operation or failure of this product.

WARNING: DSC recommends that the entire

system be completely tested on a regular basis. However, despite frequent testing, and

due to, but not limited to, criminal tampering or electrical disruption, it is possible for this

product to fail to perform as expected. Important Information: Changes or modifications

not expressly approved by DSC could void the user’s authority to operate this equipment.

EN50131-1 Grade 2, Class 2, EN50131-6 Type B

Important Information

: Changes/modifications not expressly approved by DSC could

void the user’s authority to operate this equipment.

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and

Components is copyrighted and is purchased under the following license terms:

• This End-User License Agreement (“EULA”) is a legal agreement between

You

(the

company, individual or entity who acquired the Software and any related Hardware) and

Digital Security Controls, a division of Tyco Safety Products Canada Ltd.

(“DSC”),

the manufacturer of the integrated security systems and the developer of the software and

any related products or components (“HARDWARE”) which You acquired.

• If the DSC software product (“SOFTWARE PRODUCT” or “SOFTWARE”) is intended to

be accompanied by HARDWARE, and is NOT accompanied by new HARDWARE, You may

not use, copy or install the SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes

computer software, and may include associated media, printed materials, and “online” or

electronic documentation.

• Any software provided along with the SOFTWARE PRODUCT that is associated with a

separate end-user license agreement is licensed to You under the terms of that license

agreement.

• By installing, copying, downloading, storing, accessing or otherwise using the SOFT-

WARE PRODUCT, You agree unconditionally to be bound by the terms of this EULA, even if

this EULA is deemed to be a modification of any previous arrangement or contract. If You

do not agree to the terms of this EULA, DSC is unwilling to license the SOFTWARE PROD-

UCT to You, and You have no right to use it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright

treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT

is licensed, not sold.

1. GRANT OF LICENSE This EULA grants You the following rights:

(a)

Software Installation and Use

- For each license You acquire, You may have

only one copy of the SOFTWARE PRODUCT installed.

(b)

Storage/Network Use

- The SOFTWARE PRODUCT may not be installed,

accessed, displayed, run, shared or used concurrently on or from different computers,

including a workstation, terminal or other digital electronic device (“Device”). In other

words, if You have several workstations, You will have to acquire a license for each

workstation where the SOFTWARE will be used.

(c)

Backup Copy

- You may make back-up copies of the SOFTWARE PRODUCT, but

You may only have one copy per license installed at any given time. You may use the

back-up copy solely for archival purposes. Except as expressly provided in this EULA, You

may not otherwise make copies of the SOFTWARE PRODUCT, including the printed

materials accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a)

Limitations on Reverse Engineering, Decompilation and Disassembly

You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT,

except and only to the extent that such activity is expressly permitted by applicable law

notwithstanding this limitation. You may not make any changes or modifications to the

Software, without the written permission of an officer of DSC. You may not remove any

proprietary notices, marks or labels from the Software Product. You shall institute

reasonable measures to ensure compliance with the terms and conditions of this EULA.

(b)

Separation of Components

- The SOFTWARE PRODUCT is licensed as a single

product. Its component parts may not be separated for use on more than one HARDWARE

unit.

(c)

Single INTEGRATED PRODUCT

- If You acquired this SOFTWARE with

HARDWARE, then the SOFTWARE PRODUCT is licensed with the HARDWARE as a single

integrated product. In this case, the SOFTWARE PRODUCT may only be used with the

HARDWARE as set forth in this EULA.

(d)

Rental

- You may not rent, lease or lend the SOFTWARE PRODUCT. You may not

make it available to others or post it on a server or web site.

(e)

Software Product Transfer

- You may transfer all of Your rights under this EULA

only as part of a permanent sale or transfer of the HARDWARE, provided You retain no

copies, You transfer all of the SOFTWARE PRODUCT (including all component parts, the

media and printed materials, any upgrades and this EULA), and provided the recipient

agrees to the terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any transfer

must also include all prior versions of the SOFTWARE PRODUCT.

(f)

Termination

- Without prejudice to any other rights, DSC may terminate this EULA

if You fail to comply with the terms and conditions of this EULA. In such event, You must

destroy all copies of the SOFTWARE PRODUCT and all of its component parts.

(g)

Trademarks

- This EULA does not grant You any rights in connection with any

trademarks or service marks of DSC or its suppliers.

3. COPYRIGHT

- All title and intellectual property rights in and to the SOFTWARE

PRODUCT (including but not limited to any images, photographs, and text incorporated

into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies of

the SOFTWARE PRODUCT, are owned by DSC or its suppliers. You may not copy the

printed materials accompanying the SOFTWARE PRODUCT. All title and intellectual

property rights in and to the content which may be accessed through use of the

SOFTWARE PRODUCT are the property of the respective content owner and may be

protected by applicable copyright or other intellectual property laws and treaties. This

EULA grants You no rights to use such content. All rights not expressly granted under this

EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS

- You agree that You will not export or re-export the

SOFTWARE PRODUCT to any country, person, or entity subject to Canadian export

restrictions.

5. CHOICE OF LAW

- This Software License Agreement is governed by the laws of the

Province of Ontario, Canada.

6. ARBITRATION

- All disputes arising in connection with this Agreement shall be

determined by final and binding arbitration in accordance with the Arbitration Act, and the

parties agree to be bound by the arbitrator’s decision. The place of arbitration shall be

Toronto, Canada, and the language of the arbitration shall be English.

7. LIMITED WARRANTY

(a) NO WARRANTY

- DSC PROVIDES THE SOFTWARE “AS IS” WITHOUT WARRANTY.

DSC DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR

THAT OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT -

DSC shall not be responsible for

problems caused by changes in the operating characteristics of the HARDWARE, or for

problems in the interaction of the SOFTWARE PRODUCT with non-DSC-SOFTWARE or

HARDWARE PRODUCTS.

IN ANY EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN

THIS LICENSE AGREEMENT, DSC’S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS

LICENSE AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT

ACTUALLY PAID BY YOU TO LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN

DOLLARS (CAD$5.00). BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES -

THIS WARRANTY CONTAINS THE ENTIRE

WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER

EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF ALL OTHER

OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC MAKES NO OTHER

WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON

PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS WARRANTY,

NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING THIS

SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY -

UNDER NO

CIRCUMSTANCES SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL,

CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF WARRANTY,

BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL

THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS,

LOSS OF THE SOFTWARE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF

CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT EQUIPMENT, FACILITIES OR

SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS OF THIRD PARTIES,

INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.

WARNING: DSC recommends

that the entire system be completely tested on a regular basis. However,

despite frequent testing, and due to, but not limited to, criminal tampering or

electrical disruption, it is possible for this SOFTWARE PRODUCT to fail to

perform as expected.

FCC Compliance Statement

Caution: Changes or modifications not expressly approved by Digital Security Controls

could void your authority to use this equipment.

FCC ID: F5313WTK5504P

This equipment generates and uses radio frequency energy and if not installed and used

properly, in strict accordance with the manufacturer’s instructions, may cause interference

to radio and television reception. It has been type tested and found to comply with the

limits for Class B device in accordance with the specifications in Subpart “B” of Part 15 of

FCC Rules, which are designed to provide reasonable protection against such interference

in any residential installation. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause interference to television or

radio reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures: (i)

Re-orient the receiving antenna; (ii) increase the separation between the equipment and

receiver; (iii) connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. If necessary, the user should consult the dealer or an

experienced radio/television technician for additional suggestions. The user may find the

following booklet prepared by the FCC helpful: “How to Identify and Resolve Radio/

Television Interference Problems”. This booklet is available from the U.S. Government

Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.

IC:160A-WTK5504P: The term IC before the radio certification number signifies that the

Industry Canada technical specifications were met. This Class B digital apparatus

complies with Canadian ICES-003. This device complies with RSS-210 of Industry

Canada. Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Ce dispositif satisfait aux exigences d’Industrie Canada, prescrites dans le document

CNR-210. son utilisation est autorisée seulement aux conditions suivantes: (1) il ne doit

pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout

brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le

fonctionnement du dispositif.

The trademarks, logos, and service marks displayed on this document are registered in the

United States [or other countries]. Any misuse of the trademarks is strictly prohibited and

Tyco International Ltd. will aggressively enforce its intellectual property rights to the fullest

extent of the law, including pursuit of criminal prosecution wherever necessary. All trade-

marks not owned by Tyco International Ltd. are the property of their respective owners, and

are used with permission or allowed under applicable laws. Product offerings and specifi-

cations are subject to change without notice. Actual products may vary from photos. Not

all products include all features. Availability varies by region; contact your sales represen-

tative.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

DSC WTK5504 Manuel d'installation Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC WTK5504