DSC NT9005 V1.0 Manuel d'utilisateur télécharger pdf (Page 3)

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital

Security Controls Ltd. could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

Re-orient the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful:

“How to Identify and Resolve Radio/Television Interference Problems”.

This booklet is available from the U.S. Government Printing Office, Wash-

ington D.C. 20402, Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the side of

this equipment is a label that contains, among other information, the FCC

registration number of this equipment.

Notification to Telephone Company The customer shall notify the tele-

phone company of the particular line to which the connection will be

made, and provide the FCC registration number and the ringer equiva-

lence of the protective circuit.

FCC Registration Number: F53CAN-34664-AL-E

Ringer Equivalence Number: 0.4B

USOC Jack: RJ-31X

Telephone Connection Requirements Except for the telephone com-

pany provided ringers, all connections to the telephone network shall be

made through standard plugs and telephone company provided jacks,

or equivalent, in such a manner as to allow for easy, immediate discon-

nection of the terminal equipment. Standard jacks shall be so arranged

that, if the plug connected thereto is withdrawn, no interference to the

operation of the equipment at the customer’s premises which remains

connected to the telephone network shall occur by reason of such with-

drawal.

Incidence of Harm Should terminal equipment or protective circuitry

cause harm to the telephone network, the telephone company shall,

where practicable, notify the customer that temporary disconnection of

service may be required; however, where prior notice is not practicable,

the telephone company may temporarily discontinue service if such

action is deemed reasonable in the circumstances. In the case of such

temporary discontinuance, the telephone company shall promptly notify

the customer and will be given the opportunity to correct the situation.

Additional Telephone Company Information The security control panel

must be properly connected to the telephone line with a USOC RJ-31X

telephone jack.

The FCC prohibits customer-provided terminal equipment be connected

to party lines or to be used in conjunction with coin telephone service.

Interconnect rules may vary from state to state.

Changes in Telephone Company Equipment or Facilities The tele-

phone company may make changes in its communications facilities,

equipment, operations or procedures, where such actions are reason-

ably required and proper in its business. Should any such changes ren-

der the customer’s terminal equipment incompatible with the telephone

company facilities the customer shall be given adequate notice to the

effect modifications to maintain uninterrupted service.

Ringer Equivalence Number (REN) The REN is useful to determine the

quantity of devices that you may connect to your telephone line and still

have all of those devices ring when your telephone number is called. In

most, but not all areas, the sum of the RENs of all devices connected to

one line should not exceed five (5.0). To be certain of the number of

devices that you may connect to your line, you may want to contact your

local telephone company.

Equipment Maintenance Facility If you experience trouble with this tele-

phone equipment, please contact the facility indicated below for informa-

tion on obtaining service or repairs. The telephone company may ask

that you disconnect this equipment from the network until the problem

has been corrected or until you are sure that the equipment is not mal-

functioning.

Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094

Guía de Referencia Rápida i

Garantía Limitada iii

Acerca de esta guía 1

Características del controlador NT9005 2

Sección 1: Introducción 3

Como funciona su sistema . . . . . . . . . . . . . . . . . . . . . .3

AVISO IMPORTANTE. . . . . . . . . . . . . . . . . . . . . . . . . . .3

Detección de incendio . . . . . . . . . . . . . . . . . . . . . . . . .3

Pruebas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Monitoreo remoto . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Manteni-miento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Sección 2: Usando su sistema NT9005 5

Operando el sistema desde el controlador NT9005 . . . .5

LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Sección 3: Encendiendo (Armando) y Apagando

(Desarmando) su Sistema 6

Encendiendo (armando) su sistema. . . . . . . . . . . . . . . .6

Apagando (desarmando) su sistema . . . . . . . . . . . . . . .6

Otras formas de encender (armar) su sistema . . . . . . . .7

Encendiendo (armando) su sistema cuando todos están

ausentes (Modo ausente ). . . . . . . . . . . . . . . . . . . . . . .7

Qué hacer si la sirena suena inmediatamente

después que usted sale. . . . . . . . . . . . . . . . . . . . . . . . .8

Encendiendo (armando) su sistema mientras

usted está en su hogar (modo presente) . . . . . . . . . . . .8

Encendiendo su sistema sin código de acceso

(armado rápido) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Encendiendo (armando) su sistema sin tiempo

de demora de entrada . . . . . . . . . . . . . . . . . . . . . . . . .9

Encendiendo su sistema automatica-mente

(armado automático) . . . . . . . . . . . . . . . . . . . . . . . . . .9

Saliendo cuando el sistema está armado (Salida rápida) 10

Sección 4: Tratando con alarmas

y emergencias 11

Alarmas de incendio . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Alarmas de intrusión (Robos) . . . . . . . . . . . . . . . . . . . . 12

Revisando alarmas en la memoria . . . . . . . . . . . . . . . . 12

LLamando por auxilio . . . . . . . . . . . . . . . . . . . . . . . . . 12

Sección 5: Utilizando funciones avanzadas 13

Apagando (desarmando) parte de su sistema

(exclusión de zonas) . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Revisando condiciones de falla . . . . . . . . . . . . . . . . . . 14

Probando su sistema . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Permitiendo el acceso a su sistema desde

una computadora . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Sección 6: Personalizando su sistema 17

Configura-ción de códigos de acceso. . . . . . . . . . . . . . 17

Configurando la hora y la fecha . . . . . . . . . . . . . . . . . 18

Encendiendo o apagando la timbre de puerta . . . . . . . 18

Cambiando el sonido del tono del teclado . . . . . . . . . . 18

Sección 7: Seguridad contra incendio 19

Control de artefactos del hogar para prevenir incendios19

Plan de escape de incendio . . . . . . . . . . . . . . . . . . . . . 19

Sección 8: Lineamientos para la

ubicación de detectores de humo 21

Sección 9: Reemplazando Baterías 22

Consejos para la compra de baterías . . . . . . . . . . . . . . 22

Después de instalar baterías nuevas. . . . . . . . . . . . . . . 23

Contactos de puertas/ventanas . . . . . . . . . . . . . . . . . . 23

Detectores de movimiento. . . . . . . . . . . . . . . . . . . . . . 23

Detectores de rotura de vidrio . . . . . . . . . . . . . . . . . . . 24

Detectores de humo . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Llaves inalámbricas . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Precausión: Glosario 26

Información del sistema 28

FCC 30

ADVERTENCIA 31

Indice de Materias

1 2 3 4 5 6 7 8 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

DSC NT9005 V1.0 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC NT9005 V1.0