DSC PC6010 Manuel d'utilisateur télécharger pdf (Page 3)

Section 1: Introduction

1.1 Introduction to PC6010

The PC6010 is a high end intrusion security system. It supports

up to 256 zones, 32 separate areas, and 1000 users.

The user interface is simple and easy to use. The PC6501 LCD

keypad guides users through their available options with a series

of questions, which the user can answer with YES or NO. If a

user loses their place in the menu, they can press CANCEL to

return to the start screen.

Users can be assigned to one of four user types: Basic,

Advanced, Supervisor and Master users. Each of the user types

can access different levels of features, as described in section 6

of this manual.

The status of the PC6010 system can be monitored over

telephone lines, or over a dedicated “Backbone” network (see

section 7 “System Operation and Programming”).

You can add access control to the system with PC6820 modules

and readers (see the PC6820 Installation Manual).

The PC6010 main board comes with 2 programmable outputs,

and you can add up to 208 more using PC6204 and PC6216

modules. You can program the outputs to control things such as

doorstrikes, annunciators, and lights, using 56 different output

options (see section 7 “System Operation and Programming”).

You can program the PC6010 using any system keypad, or using

DLS-3 downloading software and a computer (see section 9

“Downloading”).

1.2 Using PC6010 Manuals

Installer Manuals

This manual is for people who will be installing PC6010 systems.

Read the entire manual carefully before beginning your

installation.

This manual describes:

• An overview of the system, and the specifications of each

module (see section 2)

• How to install and wire the system and its modules (see

section 3)

• How to program the system (see section 4)

• How to enroll the keypads and modules (see section 5)

• An introduction to the user interface and keypad operation

(see section 6)

• An overview of the main system programming sections (see

section 7)

• How to set up a serial printer to print out system events (see

section 8)

• How to set up the panel for downloading (see section 9)

• How to use the Diagnostics section, reset the system to

factory default settings, and view faults (see section 10).

You should also review the Programming Manual, and

Programming Worksheets:

• The Programming Manual gives detailed descriptions of

each programming section.

• Be sure to record all your system programming in the

Programming Worksheets.

• If you will be adding modules to your PC6010 system, please

read the Installation Instructions that come with each

module.

User Manuals

Two end-user manuals come with the PC6010 system:

• The User’s Guide provides easy to follow instructions for

Basic and Advanced users. Supervisor and Master users can

also refer to this manual for instructions on turning areas on

or off, delaying automatic arming, viewing faults, etc.

• The Maintenance Manual provides instructions on using

more advanced features (e.g. changing access codes) for

Supervisor and Master users.

1 2 3 4 5 6 7 8 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

DSC PC6010 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC PC6010