DSC PC6010 Manuel d'utilisateur télécharger pdf (Page 4)

2.1 Overview

Maximum System Capabilities

• Control Unit - 1 PC6010 Main Board

• Up to 256 zones

PC6010 Main Board: 16 zones

PC6108A Expansion Modules: 8 zones each

• 2 Main Board Programmable Outputs (PGM1 & PGM2)

• 1 12 VDC Switched Programmable Auxiliary Power Supply

(Main Board)

• 1 Supervised Programmable Bell/Siren Output (Main Board)

• Up to 64 High Current Programmable Outputs with 16

PC6204 Modules

• Up to 144 Low Current Programmable Outputs with 9

PC6216 Modules

• 1 Serial (Printer) Interface - PC6400

• Up to 16 LCD Keypads - PC6501

• 1 Telephone Interface (Main Board)

• 1 Backbone Interface (using PC6442, PC6443 Modules)

User Interface

• Simple menu structure based on questions, displayed on

PC6501 LCD keypad.

• Four user types available: Basic, Advanced, Supervisor, and

Master

• The menu the user sees is limited to the functions allowed to

their user type

• Utility functions are available to users, such as remote control

doorstrikes and resetting smoke detectors.

256 Programmable Zones

• 16 zones on the main board

• Expand the system to 256 zones using PC6108A expansion

modules

• 19 zone types, including:

• Standard Delay • Auto Verify Fire

• Force Arm Delay • Momentary Arm

• Auxiliary Delay • Maintained Arm

• Instant • 24 Hr Holdup

• Interior • Auxiliary

• 24 Hr Bell • 24 Hr Auxiliary

• 24 Hr Bell/Buzz • 24 Hr Medical

• 24 Hr Buzzer • Seismic

• Standard Fire • LINKS Supervisory

• LINKS Answer

• Zones can be assigned independently to any area, and to any

alarm or seismic group.

Section 2: System Overview

32 Areas

• Separate or shared zones from other areas

• Individual keypads per area

• Individual access codes for each area

• Individual outputs programmable per area

LCD Keypads (PC6501/6501T)

• Total of 16 on the system

• Can be assigned to any area

• User-friendly interface allows fast and simple access to the

system

Access Control (PC6820)

• 16 modules in total - 2 doors per module

• 32 doors total

• Can be used to arm/disarm areas

210 Programmable Outputs

• 2 programmable outputs on the main control panel

• Main board outputs switch to 12VDC, up to 50mA maximum

current draw

• 64 programmable relay outputs - using up to 16 PC6204

Modules

• 144 programmable switched transistor outputs - using up to

9 PC6216 Modules

• Each output can be programmed for 1 of 56 PGM output

options

Switched Auxiliary Output

• Can be programmed for 1 of 56 PGM output options

• 11.6 - 12.6 VDC, 300 mA maximum

Supervised Alarm Output

• Bell Output, 200 mA fused at 5 Amps, 13.8 VDC

• Steady or Pulsed Output

• Can be programmed for 1 of 56 PGM output options

Event Buffer

• Up to 3000 events can be stored in the event buffer

• Each event is logged with a date and time stamp

• System and area events are logged in the event buffer. Area

events are identified by the area label. System events are

identified by the message “System Area”.

• Event Buffer Viewing - Supervisor and Master users can view

2500 events through the keypad, including the date and time

stamp

• Event Buffer Printing - the entire event buffer (3000 events)

can be printed through the Installer’s mode

Internal Memory

• Retains programmed data and system status, even when both

AC and battery have been removed.

• If the panel loses power (indicated by an audible fault beep),

the clock will need to be reset.

1 2 3 4 5 6 7 8 9 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

DSC PC6010 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC PC6010