
S Y S T E M I N T R O D U C T I O N
3
1.2.4 PC5200/PC5204 Power Supply Output Module
The PC5200 and PC5204 can provide up to 1 Amp of additional power for modules
or devices connected to the control panel. The PC5204 module requires a 16.5 volt
AC 40 VA transformer and 4 AH battery. In addition, the module provides 4 program-
mable high current voltage outputs
(see PC5204 Installation Instructions for details).
1.2.5 PC5208 Eight Low Current Output Module
Adds eight programmable low current outputs (50 mA) to the control.
(See PC5208
Installation Instructions for details.)
1.2.6 Escort5580 Module
This Escort5580 module will turn any touch tone phone into a fully functional keypad.
The module also includes a built-in interface to control up to 32 line carrier type
devices for lighting and temperature control
(See Escort5580 Installation Manual for
details.)
1.2.7 PC5928 and PC5936/5937 Audio Interface Module
The PC5928 Audio Interface module is a simple way to incorporate paging, intercom,
baby listen-in and door answer to the PC5015 control panel. The module also has built-
in 2-way voice capability for central station
(see PC5928 Installation Manual for details).
• PC5928 support 7 audio stations
• PC5936 supprts 7 audio stations, expands to 15 using the PC5937 module.
Three additional devices are available :
PC5921 Intercom Audio Station
can be used in conjunction with the
PC5928 Audio Interface Module
.
PC5921 EXT Door Box Audio Station
can be used in conjunction
with the PC5928 Audio Interface Module
.
PC5921 EXT/R Door Box Audio Station
can be used in conjunction
with the PC5928 Audio Interface Module. The Door Box contains a
relay so the normal door bell can be used instead of the internal one
generated by the PC5928 module.
1.2.8 PC5400 Printer Module
This PC5400 Printer Module will allow the panel to print out all events that
occur on the system to any serial printer. All events will be printed with the
Partition, time, date and the event that occurred
(see PC5400 Installation
Manual for details.)
1.2.9 LINKS1000 Cellular Communicator
The LINKS1000 Cellular Communicator provides an efficient, cost-effective method
for adding cellular back up. The unit comes in its own cabinet with antenna and
requires a separate battery and transformer
(See Section 5.26 “LINKS1000 Cellular
Communicator”).
1.2.10 Downlook Support: PC5108L and DLM-4L v1.0L
(This device is not UL Listed)
The PC5108L will expand the control panel’s zone capability by adding eight fully programmable zone inputs.
The module will also act as an interface between the DLM-4L v1.0L Video Transmission module and the PC5015
v2.2 alarm control panel. The PC5108L is also an 8-camera video switcher.
For more information on either module, see their respective installation manuals.
PC5108L DLM-4L v1.0L
PC5921 PC5921 EXT PC5921 EXT/R
Commentaires sur ces manuels