DSC Power832 PC5O15 Manuel d'utilisateur télécharger pdf (Page 26)

[68] Sixth User Display Mask

Default Option ON OFF

OFF

I_______I 1 Occupancy Mode Auxiliary Prompt ON* Occupancy Mode Auxiliary Prompt OFF

OFF I_______I

2 Occupancy Mode Day Prompt ON* Occupancy Mode Day Prompt OFF

OFF

I_______I

3 Occupancy Mode Away Prompt ON* Occupancy Mode Away Prompt OFF

OFF I_______I

4 Occupancy Mode Night Prompt ON* Occupancy Mode Night Prompt OFF

OFF I_______I

5-85-8

5-8 For Future Use

*NOTE: These options are only relevant if you are using an LCD5500Z keypad v2.1 or higher.

[97] View Software Version

[98] Initiate Global Label Broadcast

All LCD programming is done by keypad. If more than one LCD keypad is present it is not necessary to program

each independently. Labels programmed in one keypad can be broadcast to all other LCD keypads. The following

is the procedure for broadcasting labels:

Step 1 - Program one LCD keypad completely.

Step 2 - Make sure all LCD keypads are connected to the KEYBUS.

Step 3 - Enter LCD Programming at the keypad that was programmed.

Step 4 - Enter Section [98] at the keypad that was programmed.

The keypad will now broadcast all the information programmed to all the other LCD keypads on the system.

When the keypad is finished press the [#] key to exit.

[99] Factory Default LCD Keypad

The following is the procedure for factory defaulting an LCD keypad:

• Enter LCD Programming at the keypad to be defaulted. Enter Section [99]. Press the [#] when programming is complete.

1 2 ... 21 22 23 24 25 26 27 28

Pas de commentaire

DSC Power832 PC5O15 Manuel d'utilisateur Page 26