DSC PC5020 Manuel d'installation télécharger pdf (Page 47)

Appendix A: Reporting Codes

The following tables contain Contact ID and Automatic SIA format

reporting codes. For more information on reporting code formats

and notes about individual reporting codes, (See Section 5.6 Com-

municator Programming PWS Sect 6).

Contact ID

The first digit (in parentheses) will automatically be sent by the con-

trol. The second two digits are programmed to indicate specific infor-

mation about the signal.

For example, if zone 1 is an entry/exit point, you could program the

event code as [34]. The central station would receive the following:

*BURG - ENTRY/EXIT - 1

where the “1” indicates which zone went into alarm.

SIA Format - Level 2 (Hardcoded)

The SIA communication format used in this product follows the level

2 specifications of the SIA Digital Communication Standard - Octo-

ber 1997. This format will send the Account Code along with its data

transmission. The transmission will look similar to the following at

the receiver:

N Ri01 BA 01

N = New Event

Ri01 = Partition /Area Identifier

BA = Burglary Alarm

01 = Zone 1

NOTE: A system event will use the Area Identifier Ri00.

Section # Reporting Code Code Sent When...

Dialer

Direction*

Automatic

Contact ID

Codes

SIA Auto Rep

Codes**

[320]-[323] Zone Alarms Zone goes into alarm A/R

See Table 3 See Table 3

[324]-[327] Zone Restorals Alarm condition has been restored A/R

[328] Duress Alarm Duress code entered at keypad A/R (1) 21 HA-00

[328] Opening After Alarm System disarmed with alarm in memory A/R (4) A6 OR-00

[328] Recent Closing Alarm occurs within two minutes of system arming A/R (4) 59 CR-00

[328] Zone Expander Supervisory

Alarm/Rest.

Panel loses/restores supervisory transmission over the Keybus

from zone expansion modules, or keypads with zone inputs

A/R (1) 43 UA-00/UH-00

[328] Cross Zone (Police Code)

Alarm

Two zones on the same partition go into alarm during any

given armed-to-armed period (incl. 24Hr zones)

A/R (1) 4A BM-00/BV-00

[328] Burglary Not Verified A/R (3) 78 XM-00

[328]

[329] [F] Key Alarm/Rest. Keypad fire alarm (alarm and restore rep. codes sent together) A/R (1) 15 FA-00/FH-00

[329] [A] Key Alarm/Rest. Keypad auxiliary alarm (alarm and restore rep. codes sent

together)

A/R (1) AA MA-00/MH-00

[329] [P] Key Alarm/Rest. Keypad panic alarm (alarm and restore rep. codes sent

together)

A/R (1) 2A PA-00/PH-00

[329] Aux Input Alarm/Rest Option#23/24: a panic button wired to PGM 2 is pressed/

access code is entered

Option #04: a 2-wire smoke detector wired to PGM 2 goes

into alarm/alarm is cleared.

A/R

(1) 4A

(1) 11

UA-99/UH-99

FA-99/FH-99

[330]-[337] Zone Tamper/Restoral Zone is tampered / tamper condition restored T/R (1) 44 TA-ZZ/TR-ZZ

[338] General System Tamper/Rest. Enrolled module with tamper inputs has a tamper alarm/all

module tampers restored

T/R (1) 45 TA-00/TR-00

[338] Keypad Lockout Maximum number of incorrect access codes has been entered

at a keypad

T/R (4) 21 JA-00

[339-341] Closings System armed (user 01-34, 40-42 indicated) O/C (4) A2 CL-UU

[341] Partial Closing One or more zones bypassed when system armed O/C (4) 7A CG-ZZ

[341] Special Closing Closing (arming) using one of the following methods: quick

arm, auto arm, keyswitch, function key, maintenance code,

DLS software, wireless key

O/C (4) AA CL-00

[341] Late to Close Whenever the auto-arm prealert sounds (if the Late to Close

option is enabled)

O/C (4) A4 CI-00

[342-344] Openings System disarmed (user 01-34, 40-42 indicated) O/C (4) A2 OP-UU

[344] Auto-arm Cancellation Auto-arm cancelled O/C (4) A5 CE-00

* A/R = alarms/restorals; T/R = tampers/restorals; O/C = openings/closings; MA/R = miscellaneous alarms/restorals; T = test transmissions

** UU = user number (user01-42); ZZ = zone number (01-64)

WWW.DIYALARMFORUM.COM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53

Commentaires sur ces manuels

Pas de commentaire

DSC PC5020 Manuel d'installation Page 47

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC PC5020