DSC PC5020 Manuel d'installation télécharger pdf (Page 6)

Section 1: Introduction

1.1 About the Power864 System

The Power864 is a high end security system. It supports up to 64

zones, 8 separate partitions, and 32 users.

The user interface is simple and easy to use. The LCD5500Z keypad

guides users through their available options with easy-to-understand

prompts.

The status of the Power864 system can be monitored over telephone

lines, or using an alternative communicating device, including

LINKS1000, LINKS2X50, LINKS3000, Skyroute™ and DVACS.

The PC5020 main board comes with 4 programmable outputs, and

you can add up to 12 more using PC5204 and PC5208 modules. You

can program the outputs to control things such as doorstrikes and

lights, using 25 different output options. See Programmable Outputs

in Section 5.

You can program the Power864 using any system keypad, or using

DLS-3 downloading software and a computer. See How to Program

on Page 10.

Review the complete Power864 manual set before installing the

Power864 security system

1.2 About the Power864 Manual Set

Installer Manuals

Read the entire manual carefully before beginning your installation.

This manual describes:

• An overview of the system (Section 1: “Introduction”)

• How to install and wire the system and its modules (Section 2:

“Installation and Wiring”)

• How to program the system (Section 3: “How to Program”)

• An introduction to the user interface and keypad operation (Sec-

tion 4: “Keypad Commands”)

• An overview of the main system programming sections (Section

5: “Programming Sections”.

Be sure to record all your system programming in the Programming

Worksheets.

If you will be adding modules to your Power864 system, read the

Installation Instructions that come with each module.

User Guide

One user guide comes with the Power864 system. The User’s Guide

provides easy to follow instructions for end users. Installers should

also review this manual, in order to properly instruct the end-users

once the installation is complete.

1.3 Main Panel Specifications

Flexible Zone Configuration:

• 8 fully programmable zones

• 39 access codes: 32 user, 1 system master, 2 supervisor codes, 2

duress, 1 maintenance and 1 installer code

• Expandable to 64 zones

• Keypads with zone inputs available (PC5508Z, PC5516Z,

PC5532Z, LCD5500Z, and LCD5501Z)

• Hardwired expansion available using the PC5108 Eight Zone

Expansion Module, the PC5100 Addressable 32 Zone Expansion

Module and the PC5700/5720 Fire Module

• Wireless expansion available using the PC5132 Wireless 32 Zone

Expansion Module (433 or 900MHz, Fully Supervised)

• Normally closed, Single EOL, or Double EOL zone supervision

• 34 zone types, 8 Programmable zone options

• Up to 8 partitions

Audible Alarm Output:

• 700mA supervised bell output (current limit 3 amps), 12 VDC

• Steady or pulsed output

EEPROM Memory:

• Will not lose programming or system status on complete AC and

battery failure

Programmable Outputs:

• Up to 14 programmable outputs, 21 programmable options

• Three low current (50 mA) PGM outputs on main panel (PGM1,

PGM3, PGM4)

• One high current (300 mA) PGM output with 2-wire smoke detec-

tor capability on main panel (PGM 2)

• Eight additional low current (50 mA) PGM outputs available using

the PC5208 module

• Four high current (1 Amp) PGM outputs available using the PC5204

module (1 PC5204 output, fully supervised for siren output)

Powerful 1.5 Amp Regulated Power Supply:

• 550 mA auxiliary supply, 12 VDC

• Positive temperature coefficient (PTC) components replace fuses

• Supervision for loss of AC power, low battery

• Internal clock locked to AC power frequency

NOTE: For 24 hour standby, maximum Aux capacity is 420mA.

Power Requirements:

• Transformer = 16.5 VAC, 40VA (min) permanently connected

• Battery = (2) 12 volt 7 Ah (min.) rechargeable sealed lead acid

or (1) 12 volt 4 Ah battery (for Burglary applications only)

• Power864 Current Draw: 65mA

Remote Keypad Specifications:

• 5 different keypads available:

- PC5508Z 8 Zone LED keypad

- PC5532Z 32 Zone LED keypad

- PC5516Z 16 Zone LED keypad

- LCD5500Z Liquid Crystal Display (LCD) keypad

- LCD5501Z LCD-style keypad

- LCD5501Z32-900 keypad / receiver

• “Z” version keypads have one zone input

• Each keypad has 5 fully programmable function keys

• Connect up to 8 keypads

• Four wire (Quad) connection to Keybus

• Built in piezoelectric buzzer

Digital Communicator Specifications:

• Supports all major formats including SIA, Contact ID, and Resi-

dential Dial

• Split reporting of selected transmissions to each telephone number

• 3 programmable telephone numbers

• 1 system account number, plus 8 partition account numbers

• Supports LINKS1000, GSM1000 cellular communication, Links

2X50 Long Range Alarm Transmitter and Skyroute™ Cellemetry

Communication Transceiver

• DTMF and pulse dialing

• DPDT line seizure

• Anti-jam detection

• Event-initiated personal paging

System Supervision Features

The PC5020 continuously monitors a number of possible trouble

conditions including:

• AC Power Failure

• Trouble by Zone

• Fire Trouble

• Telephone Line Trouble

• Low Battery Condition

• Bell Output Trouble

• Loss of Internal Clock

• AUX Power Supply Fault

• Tamper by Zone

• Failure to Communicate

• Module Fault (Supervisory or Tamper)

• Camera Troubles via DLM-4L

WWW.DIYALARMFORUM.COM

1 2 3 4 5 6 7 8 9 10 11 ... 52 53

Commentaires sur ces manuels

Pas de commentaire

DSC PC5020 Manuel d'installation Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC PC5020