DSC PC5020 Manuel d'installation télécharger pdf (Page 7)

False Alarm Prevention Features

• Audible Exit Delay

• Audible Exit Fault

• Urgency on Entry Delay

• Quick Exit

• Swinger Shutdown

• Recent Closing Transmission

• Cross Zone Alarm

• Burglary-verified timer

• Double Hit Timer

• Communication Delay

• Rotating Keypress Buffer

Additional Features

• Automatic arming by partition at a specified time, each day of

the week

• Keypad activated alarm output and communicator test

• Keypad lockout

• Audio capability using the PC5936 Audio Interface Module,

allows local intercom and central station 2-way listen-in

• All modules connect to the system via a four wire Keybus, up to

1000’/305m from the main panel

• Event buffer can be printed using PC5400 RS-232 Serial Interface

module

• Supports the Escort5580 Voice Prompt Module, with automation

and lighting control

• 256 event buffer, time and date stamped

• Uploading/downloading capability

• Daylight savings time option

• Downlook support (DLM-4L v1.0 and PC5108L)

1.4 Additional Devices

In addition to the information below, see the back cover for a DSC

Module Compatibility table.

Keypads

A maximum of 8 keypads can be connected to the control panel.

You can connect any combination of the following listed. Different

keypads (with function keys) can be used for different size systems: 8

zone, 16 zone, 32 zone, and 64 zone.

• PC5508Z: 8 zone LED keypad, with one zone input

• PC5532Z: 32 zone LED keypad, with one zone input

• PC5516Z: 16 zone LED keypad, with one zone input

• LCD5500Z: LCD keypad, with one zone input

• LCD5501Z: LCD-style keypad, with one zone input

NOTE: The following keypad versions can only be used on the first

two partitions (Partition 1 and Partition 2), and the first 8, 16, or 32

zones:

PC5508(Z), PC5516(Z), PC5532(Z) versions v2.00 and lower

LCD5500(Z) versions 2.x and lower

LCD5501Z versions 1.x and lower

PC5100 2-Wire Addressable Device Interface Module

The PC5100 module is used to connect 2-wire addressable devices to

the system. Up to 32 2-wire addressable devices can be added to the

system

NOTE: PC5100 v1.0 and lower modules can only support the first

32 zones on the Power864 system.

PC5108 Eight Zone Expander Module

Eight zone expander module can be used to increase the number of

zones on the system. Up to 7 modules can be connected to increase

the system zones to a maximum of 64. (See the PC5108 Installation

Instructions Sheet.)

NOTE: PC5108 v1.0 and lower modules can only support the first

32 zones on the Power864 system. PC5108 v1.0 and lower modules

enroll as two modules and use up two supervisory slots.

NOTE: Do not mix PC5108 v1.x and lower modules with PC5108

v2.0 and higher modules on the same system.

PC5132 Wireless Receiver Module

The PC5132 Wireless Receiver module can be used to connect up to

32 fully supervised wireless devices. (See the PC5132 Installation

Manual for details.)

NOTE: Only the first 32 zones on the Power864 system can be

used as wireless zones.

PC5200 Power Supply Output Module

The PC5200 can provide up to 1 Amp of additional power for mod-

ules or devices connected to the control panel. Up to 4 modules can

be connected to the system. Each module requires a 16.5 volt AC 40

VA transformer and 4 AH battery. (See PC5200 Installation Instruc-

tions for details.)

PC5204 Power Supply Output Module

The PC5204 can provide up to 1 Amp of additional power for mod-

ules or devices connected to the control panel. The module requires

a 16.5 volt AC 40 VA transformer and 4 AH battery. In addition, the

module provides 4 programmable high current voltage outputs. (See

PC5204 Installation Instructions for details.)

PC5208 Eight Low Current Output Module

Adds eight programmable low current outputs (50 mA) to the con-

trol. (See the PC5208 Installation Instructions for details.)

NOTE: If you use the main panel and the PC5208 outputs, PGM 3

will work the same as the first PC5208 output, and PGM 4 will work

the same as the second PC5208 output.

Escort5580 Module

This Escort5580 module will turn any touch-tone telephone into a

fully functional keypad. The module also includes a built-in interface

to control up to 32 line carrier type devices for lighting and tempera-

ture control (See the Escort5580 Installation Manual for details.)

NOTE: Users will not be able to access partitions 3 to 8, and zones

33 to 64 through Escort5580 versions 2.x and lower. Only partitions

1 and 2, and zones 1 to 32 are supported on these versions.

PC5936 Audio Interface Module

The PC5936 Audio Interface modules provide paging, intercom,

baby listen-in and door answer to the PC5020 control panel. The

modules have built-in two-way voice capability for central station

(See the PC5936 Installation Manuals for details).

Three additional devices are available:

• PC5921 Intercom Audio Station can be used in conjunction with

the PC5936 Audio Interface Module.

• PC5921 EXT Door Box Audio Station can be used in conjunction

with the PC5936 Audio Interface Module.

• PC5921 EXT/R Door Box Audio Station can be used in conjunction

with the PC5936 Audio Interface Module. The Door Box contains a

relay so the normal door bell can be used instead of the internal

one generated by the PC5936 Audio Interface Modules.

PC5400 Printer Module

This PC5400 Printer Module will allow the panel to print out all

events that occur on the system to any serial printer. All events will

be printed with the Partition, time, date and the event that occurred.

(See PC5400 Installation Manual for details.)

NOTE: The PC5400 v2.x and lower only supports events on parti-

tions 1 and 2, and zones 1-32.

LINKS1000 Cellular Communicator

The LINKS1000 Cellular Communicator provides an efficient, cost-

effective method for adding cellular back up. The unit comes in its

own cabinet with antenna and requires a separate battery and trans-

former (See Links1000 Cellular Communicator in Section 5).

Alternate Communicators

Refer to the associated installation manual for LINKS2X50,

LINKS3000, and Skyroute™ programming details.

Downlook Support: PC5108L and DLM-4 v1.0L

The PC5108L will expand the control panel’s zone capability by add-

ing eight fully programmable zone inputs. The module will also act

as an interface between the DLM-4L v1.0 Video Transmission module

and the PC5020 control panel. The PC5108L is also an 8-camera

video switcher.

WWW.DIYALARMFORUM.COM

1 2 3 4 5 6 7 8 9 10 11 12 ... 52 53

Commentaires sur ces manuels

Pas de commentaire

DSC PC5020 Manuel d'installation Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DSC PC5020